Filter
Top Products
Application Development and Deployment 7 - 13
8. IPL displays the Select Transport menu which lists the available methods of downloading the file.
Figure 7-10
Select Transport Menu
9. Scroll to select USB or Lighthouse 0 - Serial transport, then press P2.
10. If you selected the Lighthouse 0 - Serial transport method:
a. the Baud Rate Menu appears.
Figure 7-11
Baud Rate Menu
Power Micro The Power Micro is a small computer contained within the vehicle computer that controls
several system resources. In the unlikely event that the Power Micro Firmware needs
updating, selecting this item allows the device to be programmed.
Partition Table Contains the partition information for all other partitions.
Note: The partition table should never need changing unless the sizes of the platform and
application images are changed within TCM. If this is done, then the new partition table
should be loaded first, followed by both platform and application in any order.
Command File Select to load a command file. A command file is a file that allows you to automatically load
a number of partitions in a batch process.
System Reset Selecting this item provides a simple method to exit IPL and to boot the operating system.
Auto Select Selecting this item allows one or more files to be downloaded without having to manually
select the destination. (The content of the files being downloaded automatically directs the
file to the correct destination.) For technical reasons, Auto Select cannot be used to
download Monitor, Power Micro, or Partition Table. These items must be specifically
selected.
Select Transport
USB
SD/MMC
Lighthouse 0 - Serial
Previous
Top
Table 7-2
IPL Menu Partitions (Continued)
Partition Name Description
NOTE You must disable USB ActiveSync on the development computer.
Baud Rate Menu
115200
57600
38400
19200
9600
Previous
Top