Filter
Top Products
Wireless Applications 4 - 7
Figure 4-6
Authentication Dialog Box
Tunneled Authentication
Use the Tunneled Authentication dialog box to select the tunneled authentication options. There are different
selections available for PEAP or TTLS authentication.
Figure 4-7
Tunneled Authentication Dialog Box
To select a tunneled authentication type:
1. Select a tunneled authentication type from the drop-down list. See Table 4-7 and Table 4-8.
2. Select the User Certificate check box if a certificate is required. If you selected the TLS tunnel type that
requires a user certificate, the check box is already selected.
3. Tap Next. The Installed User Certificates dialog box appears.
Table 4-6
Authentication Options
Authentication Description
None Default setting when authentication is not required on the network.
EAP TLS Select this option to enable EAP TLS authentication. EAP TLS is an authentication
scheme through IEEE 802.1x. It authenticates users and ensures only valid users can
connect to the network. It also restricts unauthorized users from accessing transmitted
information by using secure authentication certificates.
PEAP Select this option to enable PEAP authentication. This method uses a digital certificate
to verify and authenticate a user's identity.
LEAP Select this option to enable LEAP authentication, which is based on mutual
authentication. The AP and the connecting mobile computer require authentication
before gaining access to the network.
TTLS Select this option to enable TTLS authentication.