Filter
Top Products
Application Development and Deployment 7 - 31
Misc(3) Tab
This tab is used to configure various miscellaneous features.
Figure 7-28
Misc (3) Tab
Misc(4) Tab
This tab is used to configure various miscellaneous features.
Wait Welcome This check box specifies whether the AirBEAM Smart Client waits for the WELCOME windows
to be completed before automatically launching the synchronization process after a reset.
Close Apps This check box specifies whether the AirBEAM Smart Client automatically attempts to close
non-system applications prior to resetting the mobile unit. If enabled the AirBEAM Smart Client
sends a WM_CLOSE message to all non-system applications before resetting the mobile unit.
This feature offers applications the opportunity to prepare (i.e. close open files) for the pending
reset.
Table 7-10
Misc (3) Tab Descriptions
Field Description
Use DHCP
server
This check box control specifies whether the AirBEAM Smart Client uses the DHCP
response option 66 to specify the IP address of the FTP/TFTP server.
If enabled, special RF network registry settings are required to force the DHCP server to
return the “TFTP server name” field (option 66). The special RF network registry settings are
included, but commented out, in the radio network registry initialization files
(essid_xxxx_yy.reg).
Use DHCP
bootfile
This check box control specifies whether the AirBEAM Smart Client uses the DHCP
response option 67 to specify the
Package
and
Package 1
parameters.
If enabled, special RF network registry settings are required to force the DHCP server to
return the “Bootfile name” field (option 67). The special RF network registry settings are
included, but commented out, in the radio network registry initialization files
(essid_xxxx_yy.reg).
Passive Mode Use this checkbox to specify whether the Client uses passive mode FTP. This setting is
ignored if TFTP protocol is used.
Table 7-9
Misc (2) Tab Descriptions (Continued)
Field Description