Filter
Top Products
Wireless Applications 4 - 17
Tap Next. The IP Mode dialog box displays.
IP Mode
Use the IP Mode dialog box to configure network address parameters: IP address, subnet, gateway, DNS, and
WINS.
Figure 4-22
IP Config Tab (DHCP)
Select either
DHCP or Static from the drop-down list and tap Next. Selecting Static IP displays the IP Address
Entry
dialog box. Selecting DHCP displays the Transmit Power dialog box.
IP Address Entry
Use the IP Address Entry dialog box to enter the IP address and subnet information.
Figure 4-23
Static IP Address Entry Dialog Box
Table 4-12
IP Mode Options
Encryption Description
DHCP Select Dynamic Host Configuration Protocol (DHCP) from the IP Mode drop-down list to
obtain a leased IP address and network configuration information from a remote server.
DHCP is the default setting for the vehicle computer profile. When DHCP is selected, the
IP address fields are read-only.
Static Select
Static to manually assign the IP, subnet mask, default gateway, DNS, and WINS
addresses the vehicle computer profile uses.