Filter
Top Products
097-58001-02 Revision G – April 2008 TimeProvider User’s Guide 103
Chapter 4 Provisioning the TimeProvider
Using SynCraft
Creating a Connection
To create a connection to the TimeProvider, select Connection, New Connection.
The Create New Connection window appears, as shown in Figure 4-2.
Figure 4-2. The Create New Connection Window
Fill in each field as appropriate for your installation, then click Save.
Name – the name of the connection as used by SynCraft
Type – select TimeProvider from the drop-down list
SiD – enter the Source ID for the unit
Username – enter a user name in the TimeProvider’s userid list
Password – enter the password for the user. If this is the first log-in attempt, the
user level is automatically defined to be at the Security level.
Type – select TCP/IP for use with an Ethernet connection
IP address – enter the unit’s IP address
Port – enter 5000 for use with an Ethernet connection