Filter
Top Products
Appendix A Factory Default Values
Default Equipment Parameters
208 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
Default Equipment Parameters
E422-related alarms
E422FAULT
IMMEDNoNANANA
RTM-related Alarms
S1LOS
IMMED No
MN MN MN
S2LOS
IMMED No
NA NA NA
EXSLIP
IMMED No
NA NA NA
RTMFAULT
IMMED No
NA NA NA
Table A-3. Default Equipment Parameters
Parameter Default Value
System-Level Parameter (<aid>=SYS)
INACTTIME 0 (no timeout)
LOGECHO ENABLE
ELEVTIME DISABLE
SYSMODE SSU
Local/Remote Comm Port Parameters (<aid>=COMp)
AOMERGE ENABLE
BAUD 9600
ECHO DISABLE
FLOW NONE
TIDQUIET DISABLE
Ethernet Parameters (<aid>=COMI)
AOMERGE ENABLE
IPGATE 127.0.0.1
IPADDR 127.0.0.1
Table A-2. Default Alarm Settings (Continued)
Alarm ID
Default
Error Delay
Error Delay
Editable?
Default Alarm Level
SSU Mode PRR Mode SUB Mode