Filter
Top Products
Chapter 6 Maintaining and Troubleshooting the TimeProvider
Troubleshooting the TimeProvider
168 TimeProvider User’s Guide 097-58001-02 Revision G – April 2008
ECHO The current sessions’
echo setting has
changed
EQPT DISABLE ENABLE – User’s keystrokes
are echoed
DISABLE – User’s keystrokes
are not echoed
FLOW The IMC serial port
flow control has
changed
EQPT NONE NONE – No flow control
SW – Software flow control
(XON/XOFF)
HW – Hardware flow control
(CTS/RTS)
SWHW – Both hardware and
software flow control used
FWFAIL Firmware upgrade of
IMC or IOC was not
successful
EQPT n/a n/a
FWOK Firmware upgrade of
IMC or IOC was
successful
EQPT n/a n/a
INACTTIME The communication
inactivity timeout has
been set. If no activity
within the specified
time, the session
closes
EQPT 0 0 – Disable timeout
100 to 10000 seconds
INITLOG The event log has
been initialized
EQPT n/a n/a
IPADDR The IMC Ethernet
address has been
changed
EQPT 127.0.0.1 1.0.0.1 to 254.255.255.254
IPGATE The IMC Ethernet
gateway address has
been changed
EQPT 127.0.0.1 1.0.0.1 to 254.255.255.254
IPSUB The IMC Ethernet
subnet mask has been
changed
EQPT 255.255.255.0 n/a
ISDIFF
Indicates that the CRC
of two Istate images
stored on separate
modules are different
EQPT n/a n/a
Table 6-5. Event Codes (Continued)
Event ID
Keyword
Description
AID
TYPE
Default Value/
Keyword
Description of Values