Filter
Top Products
Caring for Your Printer
5
User Manual
5-55
Locking the transit restraint
Refer to the following illustration while performing these steps.
1.
When the printer displays the Ready message or the printerÕs
name, power it down using the rear-panel On/Off switch. The
printer places the printhead in the locking position.
Caution
To avoid damaging the printerÕs internal components, always turn
the printer power off and lock the transit restraint before moving the
printer. Failure to do so may result in damage to the printerÕs
internal components and may invalidate your printerÕs warranty.
2.
Locate the transit restraint on the right side of the printer and
insert a coin into the transit restraint slot.
3.
While pressing inward with medium pressure, turn the transit
restraint slot in a clockwise direction to lock the printhead in
position. The lock button is recessed from the side of the printer
when fully engaged.
966
2-4
9
2
3