Filter
Top Products
Troubleshooting
6
User Manual
6-37
Fonts printing incorrectly from Windows
If fonts are printing incorrectly from Windows, make sure you installed the
correct printer with either the Tektronix driver for Windows 3.1, or with the
Windows 95 PostScript driver.
■ If you have the standard version of the printer, you should have
installed Tektronix Phaser 380.
■ If you have the printerÕs Extended Features option, you should
have installed Tektronix Phaser 380 Extended for Windows to
recognize and use all of the printerÕs fonts.
If you select Tektronix Phaser 380 Extended and you have only
the standard version of the printer with 39 fonts, any of the
additional fonts selected within an application are printed in the
Courier typeface.
If you are not sure which version of the printer you have, print a copy of the
printerÕs Startup Page. The standard conÞguration has 39 fonts and
16 Mbytes of memory; the Extended Features option has 69 fonts and
48 Mbytes of memory. Refer to ÒPrinting Help Pages from the front panelÓ
on page 2-30 for instructions on printing a Startup Page.
Refer to the instructions on installing the printer and drivers.