Filter
Top Products
2
Getting Set Up
2-8
Phaser 380 Color Printer
Installing the optional Lower Paper Tray Assembly
A Lower Paper Tray Assembly for paper printing is available as an option.
Use Tektronix order number Z380LTA.
Caution
To avoid damage, let the printer cool down for at least 45 minutes
before you begin installing a Lower Paper Tray Assembly. This
provides sufÞcient time for the melted ink to solidify.
The Lower Paper Tray Assembly uses a universal tray with a capacity of
250 sheets of paper. The lower tray does not support printing of
transparencies. The Transparency/Paper switch on the side of the media
tray is ignored when the universal tray is installed in the Lower Paper Tray
Assembly.
Warning
The printer is not permanently attached to the Lower Paper
Tray Assembly. When moving the printer, Þrst disconnect it
from the Lower Paper Tray Assembly and then move each unit
separately. Moving the printer incorrectly may cause damage
or personal injury.
The printer weighs about 100 kg (220 lbs.). Do not attempt to
lift the printer without the assistance of others. Always use the
four pull-out handles located under each corner of the printer
when moving it.