Filter
Top Products
Getting Set Up
2
User Manual
2-21
1.
PhaserShare card port (optional)
The printer accepts one of the following:
■ PhaserShare Ethernet card supporting TCP/IP, Novell NetWare,
EtherTalk, Telnet and FTP protocols.
■ PhaserShare Token Ring card supporting TCP/IP, Novell NetWare,
TokenTalk, Telnet and FTP protocols.
■ PhaserShare LocalTalk/Serial card.
The PhaserShare Network Cards and Software System Administrator
Manual contains all the information necessary for conÞguring and
using the optional network interfaces. Refer to ÒPhaserShare
network cards (recommended)Ó on page 8-7 for ordering
information.
2.
Parallel port (standard)
The parallel port is a standard IEEE 1284 high-density port. The
adapter that is included with the printer may be used with
low-density parallel cables if an appropriate high-density cable is
not available.
3.
SCSI port (standard)
The SCSI port is used only for connecting an external SCSI hard
disk or for connecting the Phaser Copystation. Refer to ÒSCSI
peripheral devicesÓ on page 2-24 for more information on the SCSI
port. Refer to ÒPhaser CopystationÓ on page 8-8 for more
information on the Phaser Copystation.