Filter
Top Products
6
Troubleshooting
6-30
Phaser 380 Color Printer
Note
The TIMEOUTS.PS Þle affects printer operation. If the printer is
shared on a network, using this Þle may affect the prints requested
by other users.
1.
Locate the utility Þles in the PHSR380 directory on the printerÕs
CD-ROM.
2.
Copy the TIMEOUT.PS Þle to your hard disk.
3.
Open the Þle using a text editor. The default value is 40 seconds
for the wait timeout. Change the value in the WaitTimeOut line to
999.
4.
Use one of the following methods to send the TIMEOUTS.PS Þle
to the printer:
■ PC users: Use the DOS COPY command to send the Þle to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager.)
■ Workstation users: Send the Þle to the printer as you would any
PostScript Þle.