Filter
Top Products
6
Troubleshooting
6-16
Phaser 380 Color Printer
Ink Low message
appears when ink bins
are full.
Apply pressure to each row of ink sticks in the loading bin
to make sure they are not jammed.
Delayed printout. See “Printer standby modes” on page 7-8.
Printer outputs two prints
after a jam is cleared.
Printer is clearing print drum and reprinting image. Refer
to “All about media jams” on page 6-17.
Turn off the Startup
Page.
Refer to “Startup Page” on page 7-6.
Maintenance tray is
locked inside printer.
The printer locks the maintenance tray until it has cooled
down. Wait for a few minutes and try removing it again.
Operational hints (cont'd.)
Hint/Symptom Solution