Filter
Top Products
2
Getting Set Up
2-34
Phaser 380 Color Printer
Installing printer software for Windows NT 4.0
If you are installing software from ßoppy diskettes, you may need more than
one diskette depending on your Windows system. Keep all printer diskettes
handy during the installation, and insert each diskette when you are
prompted by the installation program.
Note
If you are going to be using a printer on a network, refer to your
Windows NT manual for instructions on installing network
software (either Services for Macintosh (AppleTalk) or TCP/IP
print services (for TCP/IP; lpr print services).
1.
Insert either the printerÕs CD-ROM or the Phaser 380 Color Printer
Installer for Windows Disk 1 into the appropriate drive on your
computer.
2.
Click the Start icon in the taskbar, and select Run.
3.
Type in the drive for the CD-ROM or diskette, type SETUP, and
click OK.
4.
Click Next in the two introduction screens in the Installer.
5.
In the Select Installation Type dialog box, select either Easy
Installation or Custom Installation, and click Next.