Filter
Top Products
6
Troubleshooting
6-32
Phaser 380 Color Printer
Printing PANTONE Colors
If a Phaser 380 printerÕs printer-speciÞc PANTONE Colors are not printing
as expected, make sure you are printing with Enhanced (600 x 300) mode
with color corrections set to None. Refer to ÒPrinting the PANTONE Color
ChartÓ in the on-line manual on the printerÕs CD-ROM for more
information.
There are many variables in process reproduction of colors simulated by the
Phaser 380 printer, any one of which may affect the quality of the PANTONE
Color simulation, including:
■ Type of ink used on printing press
■ Type of ink Þlm used on printing press
■ Effective Þnal resolution
■ Dot structure/halftones
If you have questions about PANTONE Color Matching, you can get
information in the following places:
■ HAL: Request a document catalog from HAL or EuroHAL,
TektronixÕ automated fax systems. Refer to ÒUsing the automated
fax systemsÓ on page 6-3 for instructions on using HAL and
EuroHAL.
■ World Wide Web: If you have access to the Internet, you can view
selected topics on the Phaser 380 printerÕs web page. Access the
printerÕs documentation from this web address:
http://www.tek.com/Color_Printers/userdoc/introduction.html
Blue colors look too purple
If printed blue colors look too purple, print your document with the
Vivid Color color correction. Refer to ÒTekColor corrections Ñ making the
best selectionÓ on page 4-3 for more information.