Filter
Top Products
3
Printing Basics
3-4
Phaser 380 Color Printer
Using the AdobePS 4 and Microsoft drivers with Windows 95
To select printing options, follow these steps:
1.
From the taskbar, select Start. In the menu that appears, select
Settings, then Printers.
2.
In the Printers window, click the Phaser 380 printer icon with the
right mouse button, then select Properties from the menu.
3.
Click the following tabs to see printing options; refer to your
Windows 95 documentation for more information on tabs and
options.
■ Click the Details tab to access timeout settings and other options.
■ Set the Timeout settings if your printer is connected to a local port.
Not Selected: Type a value in this text box to change the
number of seconds Windows waits before notifying you that a
printer is off-line. The default is 15 seconds, and is
recommended.
Transmission Retry: On large or multiple-page documents
you may see an Alert message that the printer is no longer
accepting data before the job is completely sent to the printer.
To avoid these unnecessary timeouts, set this option to a larger
value, such as 900 seconds (15 minutes). Type a value
between 45 and 999 in this text box; the Windows default
setting is 45 seconds.
■ Click the Paper tab to see media options, such as media sizes,
media trays, and media types.
■ Click the Graphics tab to see graphics options.
Note
To change the print quality modes (dpi settings), use the Print
Quality selections in the Device Options tab. These Print
Quality selections override the Resolution Options in the
Graphics tab.