Filter
Top Products
2
Getting Set Up
2-12
Phaser 380 Color Printer
3.
Remove the packing materials from the maintenance tray. Retain
the plastic bag for disposal of the used maintenance tray.
4.
Install the maintenance tray by sliding it into the printer. To
prevent jams at the media tray, be sure to push the maintenance
tray into the printer until both sides latch Þrmly into place.
5.
Close the front cover. After a short delay, the maintenance tray
begins an initialization process. You will hear a series of
ÒclickingÓ start-up noises that are normal and are not an
indication of problems with the printer.
Caution
If you move or ship the printer, be sure to remove the
maintenance tray to protect the printer from damage. Refer to
ÒMoving your printerÓ on page 5-53 for more information on
moving and shipping the printer.
9662-08