Filter
Top Products
34
ICC
10.6.2 Device Identifiers
A BACnet device’s name and ID
(the Object_Name and
Object_Identifier properties,
respectively, of the Device Object)
must be unique across the entire
BACnet network because they are
used to uniquely identify BACnet
devices. The text entry boxes
shown in Figure 23 are used to
configure these unique device identifiers on every drive.
10.6.3 Submitting Changes
Whenever either of the BACnet configuration elements (Device Name or Device ID)
has been changed, the “submit” button located in the left-hand portion of the web
page must be clicked in order to write these settings to the interface card’s
filesystem.
Note that because these
configuration elements are read from
the filesystem only when the
interface card boots up, the act of
submitting configuration changes will
also reset the interface card. Please
allow 30 seconds for the interface
card to reboot, at which time it will
then be operating with the recently-
submitted configuration. Refer to
Figure 24.
Figure 23: BACnet Device Identifiers
Figure 24: Submit BACnet Changes