Filter
Top Products
74
ICC
Figure 75: Identifying the New Module
8) Download the configuration.
9) Switch to online mode. Right click on the 1756-ENBT/A module in the I/O
Configuration and choose “Properties”.
10) Select the Port Configuration tab from the Module Properties dialog box.
11) Confirm that the IP Address, Subnet Mask and Gateway Address fields are
configured correctly. The IP Address must match the IP Address entered when
the new module was first created. Refer to Figure 76.
Figure 76: Confirming the Module's Properties
12) Apply the settings using the “Set” button.
13) You should now be able to confirm that the 1756-ENBT/A module is configured
properly by (for example) opening the module’s web interface in a web browser.