Filter
Top Products
86
ICC
2) Add a MSG instruction to the main program.
a) Double click “MainRoutine” under Tasks …MainTask …MainProgram in the
controller organizer view.
b) Right click on the first ladder logic rung in the MainRoutine window and
select “Add Ladder Element...”
c) The “Add Ladder Element” window appears.
d) Select the “MSG” instruction in
the Input/Output folder. Refer
to Figure 94.
e) Click OK.
3) Add an XIO element to the main
program.
a) Right click on the ladder logic
rung containing the MSG
instruction in the MainRoutine
window and select “Add Ladder
Element...” again.
b) The “Add Ladder Element”
window appears.
c) Select the “XIO” element in the
Bit folder. Refer to Figure 95.
d) Click OK.
4) Configure the MSG instruction.
a) Edit the “Message Control”
field on the MSG instruction to
use the previously-created
“connection” tag. Refer to
Figure 96.
Figure 94: Adding a MSG Instruction
Figure 95: Adding an XIO Element