Filter
Top Products
96
Learning the Basics
Using a compact disc drive
7 Gently press the disc onto the center spindle until you feel it
click into place.
CAUTION: Handle DVDs and CDs carefully, making contact
only with the center hole and edge. Don’t touch the surface of
the disc. Don’t stack discs. If you incorrectly handle the
discs, you could lose data.
8 Make sure the disc is completely on the spindle and is lying
flat on the tray.
CAUTION: If you insert the disc incorrectly, it may jam the
drive. If this happens, contact your Toshiba support for
assistance.
9 Push the disc tray in by pressing gently on the center of the
tray until it clicks into place.
You are ready to use the disc.
Removing compact discs
To remove a compact disc (CD or DVD) with the computer turned
on:
1 Press the eject button on the drive.
CAUTION: Do not press the eject button while the in-use
indicator light is glowing. Doing so could damage the disc
or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2 Pull the tray until it is fully open, remove the disc, and place it
in its protective cover.