Filter
Top Products
224
If the Document Scanner Unit is
dirty, your documents may not
be transmitted clearly. If the Re-
cording Unit is dirty, the docu-
ment you receive may not be
clear. In that case, clean the
Document Scanner Unit or Re-
cording Unit using the following
procedures. You can check
these problems by making a
copy.
Examples of print problem:
Open the Operation Panel. Wipe the Glass surface and the
White Plate with a soft dry cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
When the Recorded Image is not Clear...
Open the Operation
Panel
1
Wipe the Glass
Surface and White
Plate
2
62 65
Document Scanner Cleaning Procedure
Vertical black line(s)
Vertical white line(s)
Horizontal black line(s)
Horizontal white line(s)
Faint or blurred print
Stained
If the problem occurs during
both a transmission and in copy
mode, check the Document
Scanner Unit.
If the problem occurs during
both receptions and copy mode,
check the Recording Unit.
Wipe the ADF Pad and Rollers
with a dry cloth.
• If it is very dirty, wipe it with
a cloth soaked in water and
wrung out, then wipe it with a
dry cloth.
CAUTION:
Be careful not to injure your
finger(s) on the ADF spring
when you wipe the ADF pad.
Wipe the ADF Pad
and Rollers
3
66