Filter
Top Products
89
Your TOSHIBA facsimile pro-
vides various dialing methods.
One Touch Dialing
Dials remote locations with
the touch of a single key.
See page 71 for program-
ming.
Abbreviated Dialing
Dials remote locations using
an abbreviated dial number
from 001 to 999. See page
65 for programming.
Alphabet Dialing
Allows a location selection
using an alphabetic index
search of the Location IDs
programmed into One Touch
and Abbreviated Dialing Di-
rectories.
Keypad Dialing
Accepts unregistered tele-
phone number entry directly
from the operation panel.
See other dialing related func-
tions on the following pages:
Multi-Key Dialing page 113
Chain Dialing page 148
Redialing page 102
Handset & pages 98
Monitor Dialing and 99
Setting Redial page 61
Interval & Counter
If you have programmed a re-
mote party’s facsimile number
to a One Touch key, you can
dial that number by pressing the
corresponding One Touch key.
The resolution and contrast set-
tings may be changed if neces-
sary (see pages 83 and 84).
Select the desired One Touch
key from 01 to 38 (see page 71
for programming).
To select the One Touch key
from 20 to 38, press
be-
fore pressing the desired One
Touch key.
Example: One Touch key 01
One Touch key 20
+
The One Touch key number and
the name of the party appear on
the LCD display for about 2 sec-
onds.
Your facsimile will automatically
start scanning the document
into memory (if enabled). While
scanning, the facsimile dials,
connects, and starts transmis-
sion.
- DIALING METHODS
One Touch Key Dialing
1
One Touch Key Dialing
Displayed for 2 seconds
During scan to memory
During transmission
NOTES:
• If a One Touch key is not
programmed, the mes-
sage “NUMBER NOT
LISTED” is displayed for
2 seconds, an alarm
buzzer sounds and the
display returns to the pre-
vious status screen.
ONE TOUCH= 01
L.A. OFFICE
SCANNING DOC P001
FILE NBR = 089
MAY-17 09:43 AM 99%
AUTO RECEIVE
• When an incorrect One
Touch key has been se-
lected, press
im-
mediately to cancel the
transmission.
ONE TOUCH= 01
NUMBER NOT LISTED