Toshiba DP80F Fax Machine User Manual


 
45
45
This facsimile has many user
adjustable settings.
Each of these configuration set-
tings is discussed in detail
throughout the remainder of this
section.
Use the following procedures to
access one or more of these
configuration settings.
Press
. The initial Menu
Screen displays.
Press
or until the desired Configuration Setting is displayed or enter the desired
Configuration Setting 01 through 11 from the list below. The detailed configuration procedure for each
setting is shown in parentheses after the configuration setting.
01. SPEAKER VOLUME - (Page 46) - Sets the Bell Ringer, Alarm Tone, Key Touch Tone and
Monitor volume (0-7) (5*) for the machine.
02. POWER SAVER - (Page 50) - Configures the machine’s Super Power Saver function for Auto-
matic/Manual* or Off operation and Printer Power Saver function for On or Off.
03. DEPARTMENT CODE - (Page 52) - Enables, Disables* and Configures up to 50 Department
Codes.
04. ACCOUNT CODE - (Page 56) - Enables or Disables* a 4-digit Account Code entry.
05. LINE MONITOR - (Page 57) - Enables or Disables* a Line Monitor function.
06. RECEIVE INTERVAL - (Page 58) - Sets an interval for the machine to wait (0 - 14 min.) after
making four consecutive dialings.
07. ECM - (Page 59) - Enables or Disables* an ECM function.
08. SORT COPY - (Page 60) - Enables or Disables* a Sort Copy function.
09. REDIAL MODE - (Page 61) - Sets the number of redials (0-14) (5*) and redial interval (1min.-
15min.) (1*min.).
10. RECEPTION MODE - (Page 62) - Configures FAX*, FAX/TAD, TEL/FAX or Manual reception
modes.
11. COPY REDUCTION - (Page 64) - Configures the machine’s Copy Reduction function for Auto or
Off* operation.
NOTE: * indicates the factory default setting.
- DEVICE CONFIGURATION
Press to enter DEFAULT
SETTINGS. The Default Set-
tings sub-menu displays.
Press to enter MACHINE
SETTINGS. The Machine Set-
tings sub-menu will now be dis-
played.
NOTE: Only 1 selection can be
displayed at one time.
Configuration Summary
MENU
1.FAX FEATURES
DEFAULT SETTINGS
1.MACHINE SETTINGS
Enter the
Configuration Menu
1
Select the Desired Configuration Setting (01-11)
2
MACHINE SETTINGS
01.SPEAKER VOLUME
02.POWER SAVER
03.DEPARTMENT CODE
04.ACCOUNT CODE
05.LINE MONITOR
06.RECEIVE INTERVAL
07.ECM
08.SORT COPY
09.REDIAL MODE
10.RECEPTION MODE
11.COPY REDUCTION