Filter
Top Products
3 Tests and Diagnostics 3.27 Wireless LAN Test Program (Atheros)
3-66 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)
3.27.1 Setting the responder machine
1. MB44ag is installed
1) Boot the computer by MB4x Responder media.
2) The Responder T&D is automatically started.
2. MB6x is installed
As the capacity of MB6x T&D is over the one of a FD, a RAM drive is used.
1) Boot the computer by MB6x Responder media.
2) After starting the OS, following message is displayed. input m and press Enter.
***********************************************************
* *
* Atheros MB4x/MB5x/MB6x Maintenance T&D Menu *
* *
* s : Atheros MB4x DUT mode *
* *
* Please exchange FD for MB4x DUT media *
* *
* h : Atheros MB5x DUT mode *
* *
* Please exchange FD for MB5x DUT media *
* *
* r : Atheros MB5x Responder mode *
* *
* Please exchange FD for MB5x Responder media *
* *
* m : Atheros MB6x setup mode *
* *
***********************************************************
Please input the ( s / h / r / m ) key and push the "Enter" key :
3) The RAM drive name which has been set at booting is displayed and command input
is requested. Input mb6x X and press Enter. The part of X is the RAM drive name.
In the following display, it is “C”.
1,440 (1K) C: Installed Device=RAMDRIVE
Please input the following command. "mb6x X" > mb6x c [Enter]
4) The following message is displayed. Change the FD with “MB6x setup media 1” and
press Enter. The file copy from the FD to the RAM drive is started.
Please exchange FD for "MB6x setup media 1"
Press any Key to continue . . .
5) The following message is displayed. Change the FD with “MB6x setup media 2” and
press Enter. The file copy from the FD to the RAM drive is started.
Please exchange FD for "MB6x setup media 2"
Press any Key to continue . . .