Filter
Top Products
4.15 Switch membrane 4 Replacement Procedures
2. Push the latch and slide the switch membrane in the direction of the arrow in the
following figure to remove it from the membrane frame assembly.
Switch membrane
Latch
Membrane frame assembly
Figure 4-26 Removing the switch membrane (2)
Installing the Switch board
The following describes the procedure for installing the switch board (See Figure 4-25 and 4-
26).
1. Set the switch membrane into the membrane frame assembly and slide it in the
opposite direction of the arrow in the Figure 4-26.
2. Install the switch membrane assembly to the cover assembly in place.
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-43