Filter
Top Products
4.9 Bluetooth module 4 Replacement Procedures
4.9 Bluetooth module
Removing the Bluetooth module
The following describes the procedure for removing the Bluetooth module (See Figure 4-13).
1. Disconnect the Bluetooth antenna cable from the connector on the Bluetooth
module.
2. Push the stopper in the direction of the arrow to unlatch and take out the Bluetooth
module from the slot.
3. Disconnect the Bluetooth flat cable from the connector on the Bluetooth module.
4. Disconnect the Bluetooth flat cable from the connector CN4400 on the system board.
Bluetooth antenna cable
Bluetooth flat cable
CN4400
Bluetooth module
Stopper
Figure 4-13 Removing the Bluetooth module
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-25