Filter
Top Products
4 Replacement Procedures 4.22 Speaker
4.22 Speaker
Removing the speaker
The following describes the procedure for removing the speaker (See Figure 4-35).
1. Take out the analog TV tuner cable from the slot.
2. Peel off five glass tapes and remove the speakers from the slot of the base assembly.
Speaker
Glass tape
Glass tape
Speaker
A
nalog TV tuner cable
Figure 4-35 Removing the speaker
Installing the speaker
The following describes the procedure for installing the speaker (See Figure 4-35).
1. Install the speaker to the slot of the base assembly and arrange the speaker cable in
place referring to the Figure 4-35.
2. Stick five glass tapes.
3. Install the analog TV tuner cable to the slot.
4-54 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)