Filter
Top Products
4 Replacement Procedures 4.3 PC card/Bridge media
4.3 PC card/Bridge media
4.3.1 PC card
Removing the PC card
The following describes the procedure for removing the PC card (See Figure 4-3).
CAUTION: Insert or remove the PC card in accordance with any instructions in their
manual or the manuals of the computer system you are using.
1. Push the eject button. It will pop out when you release it, and then press the eject
button once more to eject PC card.
2. Grasp the PC card and remove it.
NOTE: If a PC card is not inserted all the way, the eject button may not pop out. Be
sure to push the PC card firmly and press the eject button again.
PC card
Eject button
Figure 4-3 Removing the PC card
Installing the PC card
The following describes the procedure for installing the PC card (See Figure 4-3).
1. Make sure the eject button does not stick out.
2. Insert the PC card and press it until it is securely connected.
4-10 [CONFIDENTIAL] QOSMIO F30 Maintenance Manual (960-555)