Filter
Top Products
4.5 Memory module 4 Replacement Procedures
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-17
Installing the memory module
Before installing the memory module, confirm that the computer is in boot mode. Then
perform the following procedure (See Figure 4-8).
1. Insert the memory module firmly into the connector of the computer slantwise and
press down it.
CAUTION: Be sure to install a memory module to slot A (CN1400). The computer does
not boot when a memory module in installed into slot A.
After installing the memory module, confirm that the memory module is
secured with the left and right latches.
Never press hard or bend a memory module.
2. Install the memory slot cover and secure it with the screw (with e-ring).
NOTE: When the power of the computer is turned on, the computer checks automatically
the memory size. Confirm that the new memory is detected correctly.
If the memory is not detected, check that it is connected correctly.