Filter
Top Products
4.17 Optical disk drive 4 Replacement Procedures
4.17 Optical disk drive
CAUTION: Do not perform 4.17.2 “Ejecting the optical disk” except for the emergency
ejection of optical disk inside ODD.
4.17.1 Replacing the optical disk drive
Removing the optical disk drive
The following describes the procedure for removing the optical disk drive (See Figure 4-27
and 4-28).
1. Pull out the ODD assembly from the connector CN1810 on the system board.
CN1810
ODD assembly
Figure 4-27 Removing the ODD assembly
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-45