Filter
Top Products
4.29 North bridge heat sink 4 Replacement Procedures
4.29 North bridge heat sink
Removing the North bridge heat sink
The following describes the procedure for removing the north bridge heat sink (See Figure 4-
47).
1. Remove the following screws and north bridge heat sink from the system board.
• M2.0×3S S-THIN HEAD screw ×2
M2.0x3S S-THIN HEAD
North bridge heat sink
Figure 4-47 Removing the north bridge heat sink
Installing the North bridge heat sink
The following describes the procedure for installing the north bridge heat sink (See Figure 4-
47).
1. Install the north bridge heat sink to the system board and secure it with the
following screws.
• M2.0×3S S-THIN HEAD screw ×2
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-67