Filter
Top Products
4.32 LCD cable 4 Replacement Procedures
3. Pass the LCD cable through the hole of the cover assembly to remove it.
LCD cable
Figure 4-57 Removing the LCD cable
Installing the LCD cable
The following describes the procedure for installing the LCD cable (See Figure 4-55 to 4-57).
1. Arrange the LCD cable by passing it through the hole of the cover assembly.
2. Install the LCD hold plate and secure it with the following screw.
• M2.5×6S Tapping screw ×1
3. Install the harness hold plate and stick the insulator in place.
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-79