Filter
Top Products
3.29 Sound/LAN/Modem Test Program 3 Tests and Diagnostics
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 3-77
Press any key, and the following message appear.
The sound is recorded for five seconds automatically from the microphone.
....Press test number[1-4] ? call micrec
(Omission on the way)
Recorded from source name is MIC
Requested Sampling Rate is 22025Hz
Volume requested is 0.000 dB
Record to buffer is BUFFER0
Record Time requested is 5.0000 seconds
Actual record time will be 5.000 seconds
After the recording is completed, the computer immediately plays back the
sound recorded. When the playing is finished, a message similar to the one
below appears.
Play to destination is LINEOUT
Volume requested is X.XXX dB
Play from buffer name is BUFFER0
Requested play time is 5.000 seconds.
Actual play time will be 5.000 seconds.
Completing SoundMAX/ICH play buffer to line out
End Time XXX XXX XX :XX:XX XXXX
System Status 0x0
Test completed at XXX XXX XX :XX:XX XXXX
System completion code was 0x0
Then, the screen returns to the main menu.
NOTE: The message displayed by your computer may be slightly different from the one
shown above.