Filter
Top Products
4.20 Jack board 4 Replacement Procedures
4.20 Jack board
Removing the Jack board
The following describes the procedure for removing the Jack board (See Figure 4-32).
1. Disconnect the analog TV turner cable from the connector CN9614 on the Jack
board.
2. Disconnect the Jack cable from the connector CN6500 on the system board and
connector CN6510 on the Jack board.
3. Take out the Jack board from the slot of the base assembly.
CN6510
Jack cable
Jack board
CN6500
CN9614
A
nalog TV tuner cable
Figure 4-32 Removing the Jack board
Installing the Jack board
The following describes the procedure for installing the Jack board (See Figure 4-32).
1. Connect the Jack cable to the connector CN6510 on the Jack board.
2. Install the Jack board into the slot of the base assembly.
3. Connect the Jack cable to the connector CN6500 on the system board.
4. Connect the analog TV turner cable to the connector CN9614 on the Jack board.
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-51