Filter
Top Products
5
5-11 Network Setup
TCP/IP
Specify TCP/IP settings. The current settings for IP address, subnet mask, and default
gateway address are displayed. For information about setting up printing with TCP/IP,
see Chapter 2.
The GA-1120 requires a unique, valid IP address. You can set a static address or specify
that the GA-1120 use DHCP, BOOTP, or RARP to obtain IP addresses automatically.
NOTE: If you specify the DHCP, BOOTP, or RARP protocol, the GA-1120 reboots
when you save your changes and exit Setup. Allow the GA-1120 to reboot and return
to Idle before printing a Configuration page or proceeding with any other operations.