Filter
Top Products
2
2-15 GA-1120 on a NetWare 5.x network with NDPS
Configuring a NetWare 5.x server for printing
Before you begin
The following procedure assumes NDPS has been installed during NetWare 5.x
installation and that a Broker is running on the server. Unless you have manually
unloaded the Broker, it loads and runs when you install NDPS. Make sure you are
using NetWare 5.x Service Pack version 3.0 or later, and Novell Gateway version 2.0.3 or later.
Finally, create an NDPS Manager. For more information, see your NetWare documentation.
In GA-1120 Setup, make sure you have enabled TCP/IP (page 4-16) and LPD
printing (page 4-21) on the GA-1120. You can ping the GA-1120 (page 2-19) to
verify that TCP/IP communication is successful.
Setting up the GA-1120 printer driver
You first need to create a directory forWindows NT 4.0/2000/XP or a folder for
Windows 9x/Me in the NetWare server for NDPS to install the corresponding printer
driver files from the User Software CD.
TO SET UP THE PRINTER DRIVER FOR WINDOWS NT 4.0/2000/XP
1. Log on to the Novell file server as a supervisor or Administrator.
2. In the SYS:ndps\resdir\Prndrv\NT4/2000/XP directory, create a directory called Fiery.
3. From the User Software CD, copy the contents of the
ENGLISH\PS_DRVR\WIN_NT/2000/XP folder to the Fiery directory.
TO SET UP THE PRINTER DRIVER FOR WINDOWS 9X/ME
1. Log on to the Novell file server as a supervisor or Administrator.
2. In the SYS:ndps\resdir\Prndrv\Win9x/Me directory, create a folder called Fiery.
3. From the User Software CD, copy the contents of the
ENGLISH\INSTALRS\PS_DRVR\WIN_9x/Me folder to the Fiery directory.