Filter
Top Products
2
2-3 GA-1120 on a TCP/IP network with Windows NT 4.0/2000/XP
Configuring a Windows NT 4.0/2000 server to communicate with
the GA-1120
To configure a Windows NT 4.0/2000 server to communicate with the GA-1120,
follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.
• Load the TCP/IP network protocol on the server and configure it with an
IP address, subnet mask, and gateway.
•Enter the host name of the GA-1120 in the host database used by your system (see
page 2-4).
•Perform GA-1120 Setup.
•On the Windows NT 4.0/2000 server, create a printer for each GA-1120 print
connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see page 2-5).
•Enter the host name and remote printer name of the GA-1120 in the printer
connection. For more information, see page 2-18.
•If the Windows NT 4.0/2000 server is also a workstation, install Fiery utilities (see
the User Software Installation Guide).