Filter
Top Products
4
4-10 Performing Setup from the Control Panel
Server Setup options
The Server Setup menu lets you specify system information that pertains to the
GA-1120 and all users. Accessing the menu is described on page 4-8.
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the GA-1120 (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
NOTE: Do not use the device name (Color-MFP) as the server name. Also, if you have
more than one GA-1120, do not give them the same name. Linux is not designed to
handle two computers with the same name in the same workgroup or domain.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
System Time
Enter the correct system time. Enter the time based on the 24-hour clock in the form
HH:MM (Hours:Minutes). The time appears on the Job Log.
Print Start Page
Yes/No [No]
Specify whether the GA-1120 should print a start page every time it restarts. The start
page displays information about the GA-1120, including the server name, current date
and time, amount of memory installed in the GA-1120, network protocols enabled,
and connections published.