Filter
Top Products
4
4-32 Performing Setup from the Control Panel
Use Auto Config
Yes/No [Yes]
This option appears if you chose DHCP or BOOTP as the protocol for automatically
obtaining the IP address of the GA-1120.
Choose Yes to have the GA-1120 use a WINS name server and automatically obtain its
IP address. After making your choice, proceed to the Server Name option.
Choose No to proceed to the Use WINS Name Server option, where you specify
whether to use a WINS name server, and then to the WINS IP Address option, where
you specify its IP address.
Use WINS Name Server
Yes/No [No]
Broadcasts from SMB devices cannot pass across a router without a WINS name
server. Setting up the WINS name server is outside the scope of this manual. To find
out if a name server is available, contact your network administrator.
WINS IP Address
[127.0.0.1]
This option appears only if you choose Yes for WINS Name Server. Change the default
address to the correct IP address for the WINS Name Server. Obtain the correct
address from your network administrator.
Server Name
Default Name
The server name is the name that will appear on the network for accessing the
GA-1120 via SMB. The default name is the same as the server name assigned in Server
Setup (see page 4-10).
Server Comments
Server comments (optional) can contain information about the printer. These
comments are listed in the Properties of the GA-1120 in Network Neighborhood and
can be up to 15 characters.