Filter
Top Products
5. READ (X) AND RESET (Z) REPORTS EO1-11152
5.2 General Notes On Report Takings
5-20
EFT Batch
(1) Open Batch
An open batch command is sent to the EFT terminal to declare the use of the batch file.
This operation is performed before the store opens.
Mode Lock: X or Z
30 [AT/TL]
NOTES: 1. While the ECR is communicating with the EFT Terminal, “PROCESSING” is displayed.
When the communication is completed successfully, ”BATCH OPENED” is displayed.
2. When a response from the EFT terminal was not sent correctly, an error message is displayed.
When no response was sent from the EFT terminal within a specified time (standard: 30 seconds),
a timeout error occurs on the ECR and an error message “NO RESPONS” is displayed.
3. The result of the processing (OK or NG) is printed on the journal, but not on the receipt.
(2) Close Batch
A close batch command is sent to the EFT terminal.
Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.
Mode Lock: Z
31 [#] 1 [AT/TL]
NOTES: 1. While the ECR is communicating with the EFT Terminal, “PROCESSING” is displayed.
When the communication is completed successfully, ”BATCH CLOSED” is displayed.
2. When a response from the EFT terminal was not sent correctly, an error message is displayed.
When no response was sent from the EFT terminal within a specified time (standard: 10 minutes),
a timeout error occurs on the ECR and an error message “NO RESPONS” is displayed.
3. The result of the processing is printed on the receipt.
4. When a response from the EFT terminal was not sent correctly (i.e. when a sales transaction data
was not correct), an error message is displayed.
At this time, follow the procedure below.
Step 1: Ask the hosting company which sales transaction was not correct on the telephone.
Step 2: Take a Local Transaction Inquiry Read Report to confirm the transaction sequence.
(Refer to (6) Local Transaction Inquiry.)
Step 3: Perform a void operation to delete a target item in the sales transaction.
Step 4: Retry to enter the deleted item. (Manual card number entry)
Step 5: Perform a Change Batch Number. (Refer to (4) Change Batch Number.)
Step 6: Retry to perform a Close Batch to make a settlement.
OPEN BATCH
OK
9999 17:35TM
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-31-2003 SUN #3001
CLOSE BATCH
OK
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
1CL 9999 17:35TM
In the case of an error,
“
NG
”
will be printed in place of
“
OK
”
.
In the case of an error, a response from the EFT will be printed, also.