Filter
Top Products
6. PROGRAMMING OPERATIONS EO1-11152
6.20 PLU Preset Price Setting or Changing, Whole Package Quantity Changing
6-48
6.20 PLU Preset Price Setting or Changing, Whole Package Quantity
Changing
The preset price of each PLU may be set in the PLU TABLE PROGRAMMING (Submode 4) already described.
However, in setting or changing the price and/or the whole package quantity only but not other programmed data,
the following operation will be more convenient.
Anytime outside a sale
Mode Lock: SET
Barcode Scanning
| PLU Code
| [PLU] | New Whole Package Quantity | [ST] | New Preset Price | [#] [AT/TL]
NOTES: 1. With the option “Preset Point for one decimal digit allowed”, 0 to 999999 (result: $0.00 to
$9,999.99), using the [.] key.
2. If the operation |New Whole Package Quantity
| [ST] is skipped, only a unit price setting is
performed.
3. Only for the Split Price PLU, Whole Package Quantity Changing is available.
4. Preset price of Open type PLU can also be changed.
To change a preset-price PLU into an open-price PLU, skip the “New Preset Price” entry and simply depress the
[#] key. Presetting a zero-price is also possible.
Example) To set the following preset prices of PLU:
New Whole Package Q’ty
New Preset Price
PLU20105 (Apple) 6 $1.25
Key Operation:
Mode Lock: SET
20105 [PLU] (PLU Code)
6 [ST] (New Whole Package Q’ty)
125 [#] (New Preset Price)
[AT/TL] to complete this submode
Max. 2digits; 0 to 99
6 or 13 digits
* Repeatable from here if the PLU code is sequential.
Max. 6 digits; 0 to 999999
(result: $0.00 to $9,999.99)
NOTE
Repeatable for other PLUs
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-25-2003 MON #0
P00
020105 / 6
Apple 1.25
@
0082 14:47TM
OPERATION
CONDITION