Filter
Top Products
6. PROGRAMMING OPERATIONS EO1-11152
6.14 Tare Table and General Unit Weight Setting (Submode 26)
6-39
• Tare Table and General Unit Weight Setting
26 [X] | Tare Table No.
| [ST] | Tare Weight | [#] | General Unit Weight Code | [AT/TL]
NOTES: 1. General Unit Weight Code as follows.
General Unit
Weight Code
LB Unit Kg Unit
1 1LB 1Kg
2 2LB 2Kg
3 3LB 3Kg
4 4LB 4Kg
5 5LB 5Kg
6 6LB 6Kg
7 7LB 7Kg
8 8LB 8Kg
9 9LB 9Kg
10 1/2LB 100g
11 1/4LB
2. The initial value for the General Unit Weight is set to Code 1 (1LB or 1Kg).
Example) To set the following:
Tare Table No. 1 with Tare Weight 13 grams,
General Weight 100 grams (Code 10).
Key Operation:
Mode Lock: SET, Enter 26 and depress the [X] key.
1 [ST] (Tare Table No.)
13 [#] (Tare Weight)
10 (General Weight Code)
[AT/TL] to complete this submode
1 digit (1 to 9) 0 to 999
(Unit: 1/00 LB or gram.)
(Example: enter 13 for
0.13 LB or 13 grams.)
1 to 11 (NOTE 1 below)
* (For sequentially programming
tables, the Table No.
specification can be skipped.)
*
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-25-2003 MON #0
P26
#1 0.13lb
½lb
0053 13:49TM
Repeat for other tables