Filter
Top Products
4. PROGRAMMING OPERATIONS EO1-11155
4.5 Store Name Message Programming
4-15
4.5 Store Name Message Programming
A maximum of 128 characters of Store Name Message (32 characters x 4 lines) to be printed on the receipt is
programmed here. This programming is possible only when the store message specification has been selected
by the program option, however, it is not possible when the logo message has been selected.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
OPERATION
CONDITION
[Enter]
“
1 MESSAGES
” is
selected.
Main Menu
“
3 STORE
MESSAGE
” is
selected.
Input a message in the
1st line.
Input a message in the
2nd l
ine.
Input a message in the
3rd line.
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
ECR is being outside a sale and in
SET
mode.
Depress
[1]
or
[Enter]
key.
The 1st line message is entered and the
programmed data is printed.
The ECR enters the 1st line input mode.
Depress
[
3
]
or
[Enter]
key.
The ECR enters the 2nd line input mode.
The ECR enters the 3rd line input mode.
The 2nd line message is entered and the
programmed data is printed.
The 3rd line message is entered and the
programmed data is printed.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
A maximum of 32
one-byte or 16 two-
byte
characters are input.
[End]
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Input a message in the
4th line.
[Enter]
[Enter]
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
The ECR ente
rs the 4th line input mode.
The 4th line message is entered and the
programmed data is printed.
*: To program a message in a
desired line, move the cursor
there with the [↓] key then
depress the [Enter] key.
*