Filter
Top Products
4. PROGRAMMING OPERATIONS EO1-11155
4.7 Footer Message Programming
4-20
4.7 Footer Message Programming
A maximum of 64 characters of Footer Message (32 characters x 2 lines) to be printed on the receipt is
programmed here. This programming is possible only when it has been selected by the program option.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
OPERATION
CONDITION
[Enter]
[End]
“1 MESSAGES” is
selected.
Main Menu
“
2 FOOTER MESSAGE
”
is selected.
Input a message in
the 1st line.
Input a message in
the 2nd line.
[Enter]
[Enter]
[Enter]
ECR is being outside a sale and in
SET
mode.
Depress
[1]
or
[Enter]
key.
The 1st line message is entered and the
programmed data is printed.
The ECR enters the 1st line input mode.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Depress
[
2
]
or
[Enter]
key.
The ECR enters the 2nd line input mode.
The 2nd line message is entered and the
programmed data is printed.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
*:
To program a message in a desired line, move the cursor there with
the [↓] key then depress the [Enter] key.
*