Toshiba MA-600-1 Cash Register User Manual


 
4. PROGRAMMING OPERATIONS EO1-11155
4.9 Department Table Programming
4-27
*5: Tax Status
Enter one- to four-digit status codes for applicable taxes. Or enter 0 if the department handles non-
taxable items.
[Enter]
0: Non-taxable
1: Tax 1 (Tax 1 taxable)
2: Tax 2 (Tax 2 taxable)
3: Tax 3 (Tax 3 taxable)
4: Tax 4 (Tax 4 taxable)
*6: High Amount Limit
Enter a maximum of 7 digits to be set as the high amount to be locked out.
Example) To prohibit any amount equal to or larger than 40.00:
4000 [Enter]
(Allows any amount equal to or smaller than 39.99.)
NOTES:
1. Input 0 to cancel the preset limit (i.e. to allow any amount).
2. The limit amount set here will be applied to entries in REG mode only, but not in MGR or - mode.
3. Even if a value other than zero is entered all the digits other than the highest digit, it will be regarded as a
zero.
Example) Entering 4001 to 4999 will all result in setting 4000.
*7: Low Amount Limit
Enter a maximum of 7 digits to be set as the low amount limit.
Example) To prohibit any amount smaller than 4.00:
400 [Enter]
(Prohibits any amount smaller than 4.00.)
NOTES:
1. Input 0 to cancel the preset limit (i.e. to allow any amount).
2. The limit amount set here will be applied to entries in REG mode only, but not in MGR or - mode.
3. Even if a value other than zero is entered all the digits other than the highest digit, it will be regarded as a
zero.
Example) Entering 401 to 499 will all result in setting 400.
*8: Gross Profit Rate
Enter the gross profit rate of the department in a maximum of 3 integer digits and 2 decimal digits.
[Enter] or [ . ] [Enter]
0 to 100 (%) 0.01 to 99.99 (%)
The calculated gross profit will be outputted to the DEPARTMENT GROSS PROFIT REPORT.
The fraction resulted from the profit calculation will be discarded.
To cancel the gross profit rate once set, input 0 in place of a specific rate before [Enter]. The
department whose gross profit rate has thus been canceled will not be outputted in the GROSS PROFIT
REPORT.
(More than one code can be entered for combining Tax1 to
Tax4 taxable statuses.
For example, enter 12 to select Tax1 and Tax2 taxable status.)