Filter
Top Products
4. PROGRAMMING OPERATIONS EO1-11155
4.6 Commercial Message Programming
4-19
4.6 Commercial Message Programming
A maximum of 96 characters of Commercial Message (32 characters x 3 lines) to be printed on the receipt is
programmed here.
Any time outside a sale
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
OPERATION
CONDITION
[Enter]
[End]
“1 MESSAGES” is
selected.
Main Menu
“
1 COMMERCIAL
MESSAGE” is selected.
Input a message in
the 1st line.
Input a message in
the 2nd line.
Input a message in
the 3rd line.
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
ECR is being outside a sale and in
SET
mode.
Depress
[1]
or
[Enter]
key.
The 1st line message is entered and the
programmed data is printed.
The ECR enters the 1st line input mode.
This setting is ended. A long receipt is issued
and the display returns to Main Menu screen.
Depress
[1]
or
[Enter]
key.
The ECR enters the 2nd line input mode.
The ECR enters the 3rd line input mode.
The 2nd line message is entered and the
programmed data is printed.
The 3rd line message is entered and the
programmed data is printed.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
A maximum of 32 one
-byte or 16 two-
byte
characters are input.
*:
To program a message in a desired line, move the cursor there with
the [↓] key then depress the [Enter] key.
*