Filter
Top Products
TECRA M2 6-4
Power and Power-Up Modes
Power indicators
As shown in the above table, the Battery, Slim Select Bay, DC IN 15V and
Power indicators on the system indicator alert you to the computer’s
operating capability and battery charge status.
Battery indicators
Check the Battery indicator to determine the status of the main battery and
the Slim Select Bay indicator to determine the status of the secondary
battery. The following indicator lights indicate the battery status:
DC IN 15V indicator
Check the DC IN 15V indicator to determine the power status with the AC
adaptor connected:
Flashing orange
The battery charge is low. The AC adaptor must
be connected to recharge the battery.
Orange
Indicates the AC adaptor is connected and
charging the battery.
Green
Indicates the AC adaptor is connected and the
battery is fully charged.
No light
Under any other conditions, the indicator does
not light.
If the battery becomes too hot while it is being charged, the charge will stop
and the battery indicator will go out. When the battery’s temperature falls
to a normal range, charge will resume. This occurs whether the computer’s
power is on or off.
Green
Indicates the AC adaptor is connected and
supplying proper power to the computer.
Flashing orange
Indicates a problem with the power supply. Plug
the AC adaptor into another outlet. If it still does
not operate properly, contact your dealer.
No light
Under any other conditions, the indicator does not
light.