Filter
Top Products
TECRA M2 3-6
Getting Started
Opening the display
Turning on the power
This section describes how to turn on the power.
1. If an external floppy disk drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the diskette.
2. Open the display.
3. Press and hold the computer’s power button for two or three seconds.
Turning on the power
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
DISPLAY LATCH
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Windows XP setup.
POWER BUTTON