Filter
Top Products
TECRA M2 8-15
Optional Devices
Additional battery pack
You can increase the portability of the computer with additional battery
packs. If you’re away from an AC power source and your battery runs low,
you can replace it with a freshly charged battery. See Chapter 6, Power and
Power-Up Modes.
High capacity battery pack
You can increase the portability of the computer with a high capacity battery
pack. See Chapter 6, Power and Power-Up Modes.
Slim Select Bay 2nd battery pack
You can insert a 2nd battery pack in the computer’s Slim Select Bay. The
battery comes with an adaptor. For details on using the adaptor, follow the
steps below. For details on inserting modules in the Slim Select Bay, refer
to Chapter 4, Operating Basics.
Installing
To install the 2nd battery pack in the adaptor, follow the steps below.
1. Fit the side of the 2nd battery pack opposite the connector into the
adaptor.
2. Lay the battery into the adaptor. The latch should close automatically to
secure the 2nd battery pack.
Inserting the secondary battery pack in the adaptor
Removing
To remove the 2nd battery from the adaptor, follow the steps below.
1. Slide the latch in the direction of the arrow shown below.
2. Push the 2nd battery pack up from the bottom and lift it out.